Fabric stencil operation

Step 1: Drafting

Use stencil film to cut the hollow shape on the cutting mat.

• The recommended version is divided into a main version and a decorative version.
  These can be overprinted multiple times, making the final works more varied.

• Using Hansen stencil film, which is waterproof and suitable for multiple paintings, helps prevent burrs from occurring.

Thank you, Professor Chen Biwen, for providing the artwork.

Above-main version

Above---decorative version

Step 2: Use a stencil brush to brush the color
●It can be multi-color in one plate or layered colors gradually, the main board and the decorative board overlap each other
The stencil brush should be moderately soft and fine. 
●In order to avoid smudging with too much ink, first try brushing twice on  paper and adjust the ink amount
      

●In principle, one brush should be used for the same color. Avoid washing. If you want to wash the brush, wipe it dry with a dry cloth after washing. Much water is easy to smudge
●Use special pigments for fabric, water-based, easy to clean, have been adjusted to a moderate concentration, no need to mix any oil, no need adding water, to avoid blooming.
●Fabric with special pigments  after heating (using an iron or hair dryer), they can be washed without fading.